 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TIPP115, TIPP116, TIPP117 PNP SILICON POWER DARLINGTONS Copyright (c) 1997, Power Innovations Limited, UK MAY 1989 - REVISED MARCH 1997 q q q q 20 W Pulsed Power Dissipation 100 V Capability 2 A Continuous Collector Current 4 A Peak Collector Current E C B LP PACKAGE (TOP VIEW) 1 2 3 MDTRAB absolute maximum ratings at 25C case temperature (unless otherwise noted) RATING TIPP115 Collector-base voltage (IE = 0) TIPP116 TIPP117 TIPP115 Collector-emitter voltage (IB = 0) Emitter-base voltage Continuous collector current Peak collector current (see Note 1) Continuous base current Continuous device dissipation at (or below) 25C case temperature (see Note 2) Pulsed power dissipation (see Note 3) Operating junction temperature range Storage temperature range Lead temperature 3.2 mm from case for 10 seconds NOTES: 1. This value applies for tp 0.3 ms, duty cycle 10%. 2. Derate linearly to 150C case temperature at the rate of 0.32 W/C. 3. VCE = 20 V, IC = 1 A, PW = 10 ms, duty cycle 2%. TIPP116 TIPP117 V EBO IC ICM IB Ptot PT Tj Tstg TL VCEO VCBO SYMBOL VALUE -60 -80 -100 -60 -80 -100 -5 -2 -4 -50 0.8 20 -55 to +150 -55 to +150 260 V A A mA W W C C C V V UNIT PRODUCT INFORMATION Information is current as of publication date. Products conform to specifications in accordance with the terms of Power Innovations standard warranty. Production processing does not necessarily include testing of all parameters. 1 TIPP115, TIPP116, TIPP117 PNP SILICON POWER DARLINGTONS MAY 1989 - REVISED MARCH 1997 electrical characteristics at 25C case temperature PARAMETER V (BR)CEO Collector-emitter breakdown voltage Collector-emitter cut-off current Collector-base cut-off current Emitter cut-off current Forward current transfer ratio Collector-emitter saturation voltage Base-emitter voltage Parallel diode forward voltage IC = -10 mA (see Note 4) VCE = -30 V V CE = -40 V V CE = -50 V VCE = -60 V V CE = -80 V V CE = -100 V VEB = VCE = V CE = IB = VCE = IE = -5 V -4 V -4 V -8 mA -4 V -4 A VBE = 0 V BE = 0 V BE = 0 IB = 0 IB = 0 IB = 0 IC = 0 IC = -1 A IC = -2 A IC = -2 A IC = -2 A IB = 0 (see Notes 4 and 5) (see Notes 4 and 5) (see Notes 4 and 5) (see Notes 4 and 5) 1000 500 -2.5 -2.8 -3.5 V V V TEST CONDITIONS TIPP115 IB = 0 TIPP116 TIPP117 TIPP115 TIPP116 TIPP117 TIPP115 TIPP116 TIPP117 MIN -60 -80 -100 -2 -2 -2 -1 -1 -1 -2 mA mA mA V TYP MAX UNIT ICEO ICBO IEBO hFE VCE(sat) VBE VEC NOTES: 4. These parameters must be measured using pulse techniques, tp = 300 s, duty cycle 2%. 5. These parameters must be measured using voltage-sensing contacts, separate from the current carrying contacts. PRODUCT INFORMATION 2 TIPP115, TIPP116, TIPP117 PNP SILICON POWER DARLINGTONS MAY 1989 - REVISED MARCH 1997 MECHANICAL DATA LP003 (TO-92) 3-pin cylindical plastic package This single-in-line package consists of a circuit mounted on a lead frame and encapsulated within a plastic compound. The compound will withstand soldering temperature with no deformation, and circuit performance characteristics will remain stable when operated in high humidity conditions. Leads require no additional cleaning or processing when used in soldered assembly. LP003 (TO-92) 5,21 4,44 3,43 MIN. 2,67 2,03 4,19 3,17 2,67 2,03 LP003 Falls Within JEDEC TO-226AA Dimensions Seating Plane 5,34 4,32 1,27 (see Note A) 12,7 MIN. 0,56 0,40 1 3 1,40 1,14 2,67 2,41 2 0,41 0,35 ALL LINEAR DIMENSIONS IN MILLIMETERS NOTE A: Lead dimensions are not controlled in this area. MDXXAX PRODUCT INFORMATION 3 TIPP115, TIPP116, TIPP117 PNP SILICON POWER DARLINGTONS MAY 1989 - REVISED MARCH 1997 MECHANICAL DATA LP003 (TO-92) 3-pin cylindical plastic package This single-in-line package consists of a circuit mounted on a lead frame and encapsulated within a plastic compound. The compound will withstand soldering temperature with no deformation, and circuit performance characteristics will remain stable when operated in high humidity conditions. Leads require no additional cleaning or processing when used in soldered assembly. LP003 (TO-92) - Formed Leads Version 5,21 4,44 3,43 MIN. 2,67 2,03 4,19 3,17 2,67 2,03 LP003 Falls Within JEDEC TO-226AA Dimensions 5,34 4,32 4,00 MAX. 0,56 0,40 1 2 3 2,90 2,40 0,41 0,35 2,90 2,40 ALL LINEAR DIMENSIONS IN MILLIMETERS MDXXAR PRODUCT INFORMATION 4 TIPP115, TIPP116, TIPP117 PNP SILICON POWER DARLINGTONS MAY 1989 - REVISED MARCH 1997 MECHANICAL DATA LPR tape dimensions LP Package (TO-92) Tape (Formed Lead Version) 5,21 4,44 3,43 MIN. 2,67 2,03 5,34 4,32 4,19 3,17 2,67 2,03 4,00 MAX. 0,56 0,40 0,41 0,35 13,70 11,70 32,00 23,00 27,68 17,66 2,50 MIN. 16,50 15,50 11,00 8,50 9,75 8,50 0,50 0,00 19,00 5,50 19,00 17,50 2,90 2,40 2,90 2,40 6,75 5,95 13,00 12,40 o 4,30 3,70 ALL LINEAR DIMENSIONS IN MILLIMETERS MDXXAS PRODUCT INFORMATION 5 TIPP115, TIPP116, TIPP117 PNP SILICON POWER DARLINGTONS MAY 1989 - REVISED MARCH 1997 IMPORTANT NOTICE Power Innovations Limited (PI) reserves the right to make changes to its products or to discontinue any semiconductor product or service without notice, and advises its customers to verify, before placing orders, that the information being relied on is current. PI warrants performance of its semiconductor products to the specifications applicable at the time of sale in accordance with PI's standard warranty. Testing and other quality control techniques are utilized to the extent PI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except as mandated by government requirements. PI accepts no liability for applications assistance, customer product design, software performance, or infringement of patents or services described herein. Nor is any license, either express or implied, granted under any patent right, copyright, design right, or other intellectual property right of PI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used. PI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, INTENDED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT APPLICATIONS, DEVICES OR SYSTEMS. Copyright (c) 1997, Power Innovations Limited PRODUCT INFORMATION 6 |
Price & Availability of TIPP115
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |